Custom low head metric screws manufactured domestically using 303 stainless steel material. The 1/16 hex drive was broached with a 1.5MM drive depth. Heavy torque blue thread locking patch was applied to conform to a .60 to .33 Nm minimum torque testing. Head height measured 1.75MM and the width at 9.65MM. The rounding around the edges of the head was set to R 0.020. Production samples were provided for customer testing and approval prior to commitment to a full production run. Lead time for production is 8-10 weeks from confirmed order. Certificate of conformance, First Article Inspection Report, material cert, and passivation cert were required with the parts per our customer’s request.